High-Performance Carbon Fiber Materials for Demanding Applications

20g Carbon Fiber Surface Mat from Yuruis is made from 100% chopped carbon fiber and produced by fiber dispersion and wet forming. The mat has a uniform fiber structure, smooth surface and good flexibility. It is mainly used as a surface layer for CFRP parts, as well as in selected FRP, chemical, electronic and other composite applications. Standard widths include 1 m and 1.25 m, with customized weight and specifications available for bulk orders.

The diagonal pattern of twill fabric is only one part of what makes Yuruis Twill 3K Prepreg Carbon Fiber different. In this 3K prepreg construction, the carbon fiber tow is woven into a twill structure and combined with resin before it reaches the molding stage. The result is a ready-to-process reinforcement that gives manufacturers more control over lay-up while retaining the recognizable appearance of a 3K carbon surface.

For repeat composite manufacturing, the processing method is an important part of material selection. Yuruis Thermoplastic Prepreg Carbon Fiber combines carbon fiber reinforcement with a thermoplastic resin matrix that can be heated, formed and consolidated. It is available for lightweight automotive components, industrial parts, transportation structures and sports equipment, with material specifications customized according to the required application and forming process.

Reinforcement direction is an important part of composite laminate design because different components carry loads in different directions. Yuruis 3K UD and Bidirectional Carbon Fiber Prepreg Fabric combines 3K carbon fiber reinforcement with a pre-impregnated resin matrix, with UD construction for a defined primary load direction and bidirectional construction for reinforcement across two principal axes.

Component weight depends on the reinforcement, resin content and laminate construction, not simply on the amount of carbon fiber used. Low-Density Prepreg Carbon Fiber from Yuruis combines carbon fiber reinforcement with a pre-impregnated resin matrix for composite parts where weight is an important design factor. The final laminate can be specified according to the fabric construction, dimensions, resin system and processing requirements of the part.

When a composite component has a defined primary load direction, reinforcement can be concentrated along that direction rather than distributed equally across the laminate. Unidirectional Carbon Fiber Prepreg Fabric combines continuous carbon fibers arranged predominantly in one direction with a pre-impregnated resin matrix. It is used in composite parts for sports equipment, automotive components and industrial structures where fiber orientation is part of the laminate design. Yuruis supplies the material in customized sizes and specifications according to the component and manufacturing process.