Carbon Fiber Tissue for Lightweight Composite Reinforcement

Carbon Fiber Tissue for Lightweight Composite Reinforcement is a chopped carbon fiber material used as a thin layer in composite laminates. Unlike woven carbon fiber fabric, it does not have a fixed warp-and-weft structure. The chopped fibers form a distributed reinforcement layer that can be incorporated into a multi-layer composite construction.

The material is different from woven and unidirectional carbon fiber because the fibers are not arranged as continuous yarns in one or two defined directions. Its position in the laminate can therefore be selected according to the part structure, required thickness and other reinforcement materials used in the same construction.

Weight and width are available according to the specified requirement. The appropriate specification is normally determined by the part, laminate construction and manufacturing process.

Typical Composite Applications

Chopped Fiber Construction

The material uses 100% carbon fiber in chopped form. The fibers are distributed within the tissue rather than woven into continuous warp and weft yarns.

This construction makes the material different from plain weave, twill and unidirectional carbon fiber fabrics. Those materials have defined fiber directions, while chopped fiber provides a more distributed reinforcement pattern within the layer.

The actual role of the tissue depends on where it is placed in the laminate and how it is combined with the other reinforcement layers. It can be specified as part of a lightweight laminate rather than as a replacement for every type of structural carbon fiber fabric.

Yuruis provides customized weight requirements for different composite constructions.

Using the Tissue in Composite Processing

Carbon Fiber Tissue for Lightweight Composite Reinforcement can be incorporated into resin-based composite structures according to the selected manufacturing method. The resin system, impregnation method and laminate sequence should be established before production.

When it is added to an existing laminate, the tissue needs to fit the surrounding reinforcement and the required part thickness. Its weight and width can be checked against the cutting, lay-up or molding process already used for the component.

The tissue should not be evaluated separately from the finished laminate. The resin, fiber content, consolidation and curing conditions also affect the properties of the molded composite.

For quotation, the application, required weight, width, resin system, production method and estimated quantity provide the basic information needed to define the material.

Specification and Sample Confirmation

For a replacement project, the existing material specification is useful for checking whether the new tissue can fit the current production process. Weight, width and fiber form are the main points to confirm before regular supply.

A sample can also be evaluated in the customer's own laminate or molding process. This allows the material to be checked for handling, resin impregnation and compatibility with the existing production setup.

For repeat orders, the confirmed specification can be retained as the reference for subsequent production.

Frequently Asked Questions

Is Carbon Fiber Tissue the same as carbon fiber woven fabric?

No. Carbon fiber tissue uses chopped carbon fiber, while woven carbon fiber fabric uses continuous carbon fiber yarns arranged in defined warp and weft directions. The two materials have different constructions and are used differently in composite laminates.

What is Carbon Fiber Tissue for Lightweight Composite Reinforcement used for?

It is used as a lightweight carbon fiber layer in selected CFRP laminates, molded composite parts and composite applications in automotive, sports, aerospace, electronics and general industry.

Can the material weight be customized?

Yes. The listed specification allows customized weight. The required value can be defined according to the laminate construction and production process.

What widths are available?

The listed widths are 1 meter and 1.25 meters. Other requirements can be reviewed according to the production setup.

Can it be used with resin?

Yes, the material can be incorporated into resin-based composite construction. The suitable resin system and processing method should be confirmed for the intended application.

Can I request a sample before placing a bulk order?

Yes. A sample can be used to check the material in the customer's own laminate, resin or molding process before regular production.

What information should I send for a quotation?

Please provide the required weight, width, application, resin system, production method and estimated quantity. An existing material specification or sample is also useful for replacement projects.